Pubblicazioni sezione strutture

Riviste internazionali

  • Zerbin, M., Aprile, A., Spacone, E. (2020). New formulation of ductility reduction factor of RC frame-wall dual systems for design under earthquake loadings. Soil Dynamics and Earthquake Engineering. 138, 106279, November 2020 (online).
  • Gulinelli P., Aprile A., Rizzoni R., Grunevald Y.H., Lebon F., (2020). Multiscale numerical analysis of TRM reinforced masonry under diagonal compression tests. Buildings, 10 (11), 196, November 2020 (online).
  • Grossi, E., Zerbin, M., Aprile, A. (2020). Advanced Techniques for Pilotis RC Frames Seismic Retrofit: Performance Comparison for a Strategic Building case study. Buildings, 10 (9), 149, September 2020 (online).
  • Basaglia, A., Aprile, A. Spacone ,E., Pelà, L. (2020). Assessing Community Resilience, Housing Recovery and Impact of Mitigation Strategies at the Urban Scale: A Case Study After the 2012 Northern Italy Earthquake. Bulletin of Earthquake Engineering. 18(13), 6039-6074.
  • Gulinelli P., Aprile A., Rizzoni R., Grunevald Y.H., Lebon F., Lovisetto R., Tralli S. (2019). A FE model for TRM reinforced masonry walls with interface effects. Key Engineering Materials, 817, 57-64.
  • Zerbin, M., Aprile, A., Beyer, K., Spacone, E. (2019). Ductility reduction factor formulations for seismic design of RC wall and frame structures. Engineering Structures. 178, 1 January 2019, 102-115.
  • Cara, S., Aprile, A., Pelà, L., Roca, P. (2018). Seismic Risk Assessment and Mitigation at Emergency Limit Condition of Historical Buildings along Strategic Urban Roadways. Application to the “Antiga Esquerra de L’Eixample” Neighborhood of Barcelona. International Journal of Architectural Heritage 12(7-8), 1055-1075.
  • Basaglia, A., Aprile, A., Spacone, E., Pilla, F. (2018). Performance-based Seismic Risk Assessment of Urban Systems. International Journal of Architectural Heritage, 12(7-8), 1131-1149.
  • Pelà L., Roca P., Aprile A. (2018). Combined in-situ and laboratory minor destructive testing of historical mortars. International Journal of the Architectural Heritage. 12 (3), 334–349.
  • Tittarelli F., Ruello M.L., Capuani D., Aprile A. (2017). Damaged Concrete Viaduct in an Italian Highway: Concrete Characterization and Possible Strengthening Techniques by FRP Applications in Comparison. IOP Conference Series: Materials Science and Engineering, 245 (3), 032069.
  • Breveglieri, M., Barros, J.A.O., Aprile, A., Ventura-Gouveia, A. (2016). Strategies for numerical modeling the behavior of RC beams strengthened in shear using the ETS technique. Engineering Structures, 128, 296–315.
  • Colombo M., Valente T., Barros J.A.O, Aprile A., Lourenço L. (2016). Fibre reinforced mortar application for out-of-plane strengthening of schist walls. Construction and Building Materials, 121, 185–197.
  • Pelà L., Canella E., Aprile A., Roca Fabregat P. (2016). Compression test of masonry core samples extracted from existing brickwork. Construction and Building Materials, 119, 230–240.
  • Breveglieri M., Aprile A., Barros J.A.O. (2016). “RC Concrete Beams Strengthened in Shear Using the Embedded Through-Section Technique: Experimental Results and Analytical Formulation”. Composites Part B: Engineering, 89, 266-281.
  • Almeida J.A.P.P, Bordigoni D., Pereira E.B., Barros J.A.O., Aprile A. (2016). “Assessment of the properties to characterise the interface between clay brick substrate and strengthening mortar”. Construction and Building Materials, 103, 47-66.
  • Zerbin M., Aprile A., (2015). “Sustainable retrofit design of RC frames evaluated for different seismic demand” Earthquakes and Structures, Vol. 9, No. 6, 1337-1353.
  • Breveglieri M., Aprile A., Barros J.A.O. (2015). “Embedded Through-Section Shear Strengthening Technique Using Steel and CFRP Bars in RC Beams of Different Percentage of Existing Stirrups”. Composite Structures, 126, 101-113.
  • Breveglieri M., Aprile A., Barros J.A.0. (2014). “Shear Strengthening of Reinforced Concrete Beams Strengthened Using Embedded Through Section Steel Bars”. Engineering Structures, 81(15), 76–87.
  • Pelà L., Benedetti A., Aprile A., Mangoni E. (2013). “Seismic Assessment of the Milano Centrale Railway Station”. International Journal of the Architectural Heritage, 7, 609-627.
  • Pelà L., Aprile A., Benedetti A. (2013). “Comparison of Seismic Assessment Procedures for Masonry Arch Bridges”. Construction And Building Materials, 38, 381-394.
  • Pelà L. Aprile A., Benedetti A. (2012). “Experimental study of retrofit solutions for damaged concrete bridge slabs” Composites Part B: Engineering, 43, 2471-2479.
  • Breveglieri M., Barros J. A. O., Dalfré G. M., Aprile A., (2012). “A Parametric Study About the Effectiveness of the NSM Technique for the Flexural Strengthening of Continuous RC Slabs”, Composites Part B: Engineering, 43, 1970-1987.
  • Perrone M., Barros J.A.O., Aprile A., (2009), “A CFRP-Based Strengthening Technique to Increase the Flexural and Energy Dissipation Capacities of RC Columns”, Journal of Composites for Construction, ASCE, 13 (5), 372-383.
  • Pelà L., Aprile A., Benedetti A., (2009), “Seismic assessment of masonry arch bridges”, Engineering Structures, 31, 1777-1788.
  • Ruello M.L., Tittarelli F., Capuani D., Aprile A., Fava G., (2008). “Damage Assessment of Concrete by Ionic Flux Measure from Cement Paste Matrix”, Special Topics on Materials Science and Technology – An Italian Panorama, BRILL Ed.
  • Aprile A., Feo L., (2007), “Concrete cover rip-off of R/C beams strengthened with FRP composites”, Composites Part B: Engineering, 38, 759-771.
  • Aprile A., Benedetti A., Mangoni E., (2006), “Design and Execution of Aluminium Space Frame Advertising Panels and Towers”, Structural Engineering International Journal, IABSE, 4, 367-373.
  • Aprile A., Benedetti A., (2004), “Coupled Flexural-Shear Design of R/C Beams Strengthened with FRP”, Composites Part B: Engineering, 35 (1), 1-25.
  • Aprile A., Spacone E., Limkatanyu S., (2001), “Role of Bond in RC Beams Strengthened with Steel and FRP Plates”, Journal of Structural Engineering, ASCE, 127(12), 1445-1452.
  • Aprile A., Benedetti A., Grassucci F., (2001), “Assessment of Cracking and Collapse Behavior for Old Brick Masonry Columns”, Journal of Structural Engineering, ASCE, 127(12), 1427-1435.
  • Aprile A., Benedetti A., (1999), “Nonlinear Dynamic Analysis in the Frequency Domain of Structural Systems”, Structural Dynamic Systems Computational Techniques and Optimization; Nonlinear Techniques, Gordon & Breach International Series in Engineering, Technology and Applied Science, 15, 1-48.
  • Aprile A., Benedetti A., (1999), “Implicit Dynamic Analysis of VE-Damped Structures Using Maxwell Parallel Systems”, Engineering Computations, 16(3), 374-396.
  • Aprile A., Benedetti A., (1998), “On the Optimal Design of Aluminum Space Frame Structures”, Costruzioni Metalliche, L(1), 11-33.
  • Aprile A., Inaudi J.A., Kelly J.M., (1997), “Evolutionary Model of Viscoelastic Dampers for Structural Applications”, Journal of Engineering Mechanics, ASCE, 123(6), 551-560.
  • Aprile A., Benedetti A., Trombetti T, (1994), “On Non-Linear Dynamic Analysis in the Frequency Domain: Algorithms and Applications”, Earthquake Engineering & Structural Dynamics, 24(4), 363-388.

Comunicazioni a congressi internazionali

  • Basaglia, A., Aprile, A. Spacone ,E., Pelà, L. (2021). Assessing the impact of seismic risk mitigation at the urban scale on community resilience and housing recovery. 12th International Conference on Structural Analysis of Historical Constructions, SAHC 2021. 29-30 September 2021, Barcelona, Spain.
  • Rigattieri, F., Maurel-Pantel, A., Lebon, F., Rizzoni, R., Aprile, A., (2020). Bonded connections of aluminum structures: experimental and numerical investigation. Proceedings of the 7th International Symposium on Life-Cycle Civil Engineering, IALCCE 2020. 27-30 October 2020. Shanghai, China. Editors: Airong Chen, Xin Ruan, Dan M. Frangopol. CRC Press.
  • Gulinelli, P., Aprile, A., Rizzoni,R., Grunevald, Y.H., Lebon, F., (2019). Prediction of periodic masonry wall stiffness with artificial neural networks. The 5th International Conference on Soft Computing & Optimisation in Civil, Structural & Environmental Engineering. 16-19 September 2019, Riva del Garda, Italy.
  • Basaglia A., Spacone E., Brando G., Gonzalez A. Aprile A. (2019). Define Urban Limit Conditions by Applying Performance Goals. IABSE Symposium 2019 Guimarães. Towards a Resilient Built Environment – Risk and Asset Management. March 27-29, 2019, Guimarães, Portugal.
  • González, A., Basaglia, A., Brando, G., Spacone, E., Aprile, A. (2018). Hazard Calculation Routines for Earthquake Scenarios. Proc. 6th International Conference YOCOCU, Youth in Conservation of Cultural Heritage, May 22-26 2018 Matera, Italy.
  • Pelà L., Roca P., Aprile A., (2016). “Comparison of MDT techniques for mechanical characterization of historical masonry”. Proc. SAHC 2016, 13-15 September 2016, Leuven, Belgium.
  • Basaglia A., Aprile A., Pilla F., Spacone E., (2016). “Computer-aided risk assessment at urban scale. Model definition and validation on a case study”. Proc. ECCOMAS 2016, 5-10 June 2016, Crete Island, Greece.
  • Barros J.A.O, Breveglieri M., A. Ventura Gouveia, Dalfré G.M., Aprile A., (2013) “Model to simulate the behavior of RC beams shear strengthened with ETS bars”, FraMCoS-8, 10-14 March 2013, Toledo, Spain.
  • Dalfré G., Barros J.A.O., Breveglieri M., Aprile A., (2012). “Parametric study on the behavior of continuous RC slab strips flexurally strengthened by the NSM technique”, Proc. CBC 2012, Maceiò-Alagoas, Brasil.
  • Dalfré G., Barros J.A.O., Breveglieri M., Aprile A., (2012). “The contribution of embedded through-section bars for the shear resistance of RC beams”, Proc. CINPAR 2012, La Plata, Argentina.
  • Breveglieri M., Barros J. A. O., Dalfré G. M., Aprile A. (2011). “Assessment of the Effectiveness of NSM-CFRP Flexural Strengthening Configurations for Continuous RC slabs”, Proc. fib Symposium 2011, Prague, Czech Republic, 1149-1152.
  • Leprotti L., Pelà L., Aprile A., Benedetti A., (2010), “Control Node Identification in Nonlinear Seismic Analysis of Masonry Arch Bridges”, Proc. 8th International Masonry Society (IMC) Conference, Dresden, Germany, 1113-1122.
  • Aprile A., Bucchi A., Tralli A. (2009), “ A predictive model for the seismic safety assessment of school masonry buildings”, Proc. COMPDYN 2009, Rhodi, Greece.
  • Benedetti A., Pelà L., Aprile A., (2008), “Masonry Properies Determination Via Splitting Tests on Cores with a Rotated Mortar Layer”, Proc. ISSM08, Istanbul, Turkey.
  • Tittarelli F., Ruello M.L., Capuani D., Aprile A., (2008), “Investigation of a Deteriorated Reinforced Concrete Infrastructure and Possibile Repair”, Proc. SACoMaTiS 2008, Varenna (LC), Italy.
  • Benedetti A., Mangoni E., Aprile A., (2008), “Seismic Assessment of the Milan Central Railway Station”, Proc. CCC 2008, Porto, Portugal.
  • Barros J.A.O., Perrone M., Aprile A., (2008), “Hybrid CFRP-Based Strengthening Technique to Increase the Flexural Resistance and Concrete Confinement of RC Columns Submitted to Axial and Cyclic Lateral Loading”, Proc. CCC 2008, Porto, Portugal.
  • Barros J.A.O., Dalfré G. M., Trombini E., Aprile A., (2008), “Exploring the Possibilities of a New Technique for the Shear Strengthening of RC Elements”, Proc. CCC 2008, Porto, Portugal.
  • Aprile A., Benedetti A., Steli E., Mangoni E., (2007), “Seismic Risk Mitigation of Masonry Structures by Using FRP Reinforcement”, Proc. FRPRCS-8, Patras, Greece.
  • Aprile A., Benedetti A., Pelà L. (2007), “Repair and Strengthening with FRP of Damaged Bridge R/C Slabs”, Proc. FRPRCS-8, Patras, Greece.
  • Tralli A., Biolcati Rinaldi M., Aprile A., Angeli C., (2006), “Quality in Vulnerability Assessment of Existing RC Structures”, Proc. Joint International Symposium of CIB Working Commissions, Rome, Italy.
  • Aprile A., Feo L., (2006), “An Analytical Model to Predict the Ripp-off Failure Load of R/C Beams Externally Strengthened with FRP”, Proc. ICCE 14, Colorado, USA.
  • Aprile A., Capuani D., Benedetti A., Frassine R., (2006), “Damage of Concrete and Bonding of FRP Reinforcement”,Proc. 2nd International fib Congress, Naples, Italy.
  • Aprile A., Feo L., Manzoni S., Benedetti A., Ascione L., (2006), “Flexural Crack pattern on R/C Beams Strengthened with FRP”, Proc. 2nd International fib Congress, Naples, Italy.
  • Aprile A., Benedetti A., Cosentino N., (2006), “Seismic Reliability of Masonry Structures Strengthened with FRP Materials”, Proc. 8th U.S. National Conference on Earthquake Engineering, San Francisco (8NCEE), CA, USA.
  • Aprile A., Capuani D., (2006), “FRP Reinforcement for Damaged R/C Bridge Decks”, Proc. International Symposium Polymers in Concrete (ISPIC), Guimarães, Portugal.
  • Anselmi V., Aprile A., Benedetti A., (2005), “Safety and reliability of structures including ductile and brittle elements”, Proc. ICOSSAR 05, Rome, Italy.
  • Aprile A., Limkatanyu S., Spacone E., (2001), “Analysis of R/C Beams Strengthened with FRP Plates”, Proc. ASCE Structures Conference, Washington, DC, USA.
  • Aprile A., Benedetti A., Camata G., (2000), “On the structural performance of concrete filled FRP tubes in flexure”, Proc. International Conference on Advanced FRP Materials for Civil Structures, Bologna, Italy.
  • Aprile A., Benedetti A., (2000), “Damage Evaluation and Control for Fatigue under Stochastic Excitation”, Proc. 8th PMC, ASCE, Notre Dame, IN, USA.
  • Aprile A., Benedetti A., (1999), “On the Performance Optimization of Damped Space Frame Panels under Stochastic Wind Excitation, Proc. 40th IASS Congress, Madrid, Spain.
  • Inaudi J.A., Blondet M., Kelly J.M., Aprile A., (1996), “Heat Generation Effects on Viscoelastic Dampers in Structures”, Proc. 11° WCEE, Acapulco, Mexico.

Comunicazioni a congressi nazionali

  • Breveglieri M., Barros J.A.O., Dalfrè G.M., Aprile A. (2011). “Rinforzo a flessione di solette continue in c.a. con tecnica CFRP-NSM. Influenza della configurazione di rinforzo sul comportamento a rottura”. Atti I Convegno Nazionale Assocompositi. Milano.
  • Perrone M., Spacone E., Camata G., Aprile A. (2009). “Il comportamento sismico delle costruzioni in terra cruda”, Atti XIII Convegno CeDTerra: Festa della Terra 2009, Casalincontrada, Chieti.
  • Bucchi A., Aprile A., Tralli A. (2009). “Analisi pushover di costruzioni in muratura con codici di calcolo commerciali: problematiche a confronto”. Atti ANIDIS 2009, Bologna.
  • Aprile A., Benedetti A., Marani F., (2008), “Ruolo delle connessioni nel comportamento sismico delle strutture prefabbricate monopiano in c.a.”, Atti Convegno Reluis: Valutazione e riduzione della vulnerabilità sismica di edifici esistenti in c.a., Roma.
  • Aprile A., Benedetti A., Mangoni E., (2008), “Vulnerabilità sismica di edifici monumentali: il caso della Stazione Centrale di Milano”, Atti Convegno Reluis, Valutazione e riduzione della vulnerabilità sismica di edifici esistenti in c.a., Roma.
  • Ruello M.L., Tittarelli F., Capuani D., Aprile A., Fava G., (2008). “Misura dei flussi di lisciviazione da matrici cementizie per la valutazione del degrado di calcestruzzo”, Atti AIMAT 08, 601-604, Piano di Sorrento, Napoli.
  • Aprile A., Benedetti A., Pelà L., (2006), “Analisi Pushover di Ponti in Muratura”, Atti del Workshop Ponti e Viadotti: Aspetti progettuali, strutturali e di manutenzione, Pistoia.
  • Aprile A., Benedetti A., Pelà L., (2006), “Vulnerabilità sismica di ponti ad arco in muratura di pietrame”, Atti GIMC 2006, Bologna.
  • Aprile A., (2003), “Bond verification for flexural design of R/C beams strengthened with FRP”, Atti XVI Congresso AIMETA di Meccanica Teorica e Applicata, Ferrara.
  • Aprile A. (2003), “Il rinforzo per flessione”, Atti del Corso L’Impiego di Materiali Compositi Fibrorinforzati (FRP) nella Riabilitazione Strutturale di Elementi in c.a., 15-16, 22-23 marzo 2002, Bologna.
  • Aprile A., Benedetti A., Colombi A., (2002), “Modellazione di tubi in polimero fibro-rinforzato riempiti di calcestruzzo”, Atti AICAP’02, Bologna.
  • Aprile A., Benedetti A., Sbardellati F., (2001), “Prevenzione del danno a fatica di strutture in lega leggera soggette all’azione del vento”, Atti XVIII C.T.A., Venezia.
  • Ferraresi E., Lumachi A., Frassine R., Aprile A., (2001), “Caratterizzazione meccanica di materiali compositi per il consolidamento di strutture civili”, Atti XV A.I.M., Trieste.
  • Aprile A., Benedetti A., Laudiero F., (2001), “Il traliccio ad inclinazione variabile nella progettazione a taglio di travi rinforzate con FRP”, Atti della giornata di studio S&T, Firenze.
  • Aprile A., Benedetti A., Tovo R., (2000), “Analisi di Spettri di Carico Affaticanti per Strutture Metalliche Soggette a Sollecitazioni da Vento”, Atti della giornata di studio AIAS:“Esperienze nell’applicazione degli spettri di carico alla progettazione a fatica”, Milano.
  • Aprile A., Benedetti A., (2000), “On the Fatigue Optimization of Damped Space Frames under Stochastic Wind Excitation”, Atti 6° ANIV, Genova.
  • Aprile A., Benedetti A., Cervellati A., (1999), “Progettazione di Interventi di Riabilitazione Strutturale con l’Impiego di Tessuti Fibrorinforzati”, Atti AICAP’99, Torino.
  • Aprile A., Benedetti A., Cervellati A., (1998), “Metodi di Ripristino di Strutture Danneggiate da Incendio Mediante Placcaggi in C-FRP”, Atti. 12° CTE, Padova.
  • Aprile A., Benedetti A., (1997), “Modellazione Dinamica di Strutture Dotate di Dissipatori Viscoelastici”, Atti. XIII AIMETA, Siena.
  • Aprile A., Ceccoli C., (1995), “Sul Comportamento Meccanico degli Smorzatori Viscoelastici Impiegati per la Protezione Sismica delle Strutture”, Atti del 1° Convegno Nazionale AsIS, Bergamo.
  • Aprile A., Ceccoli C., Inaudi J.A., (1994), “Su un modello costitutivo Isteretico-Evolutivo per Dispositivi a Smorzamento Viscoelastico” Atti del 10° Congresso C.T.E., Milano.
  • Aprile A., Ceccoli C., (1993), “Sull’influenza dell’attrito degli appoggi nell’isolamento sismico dei viadotti”, Atti delle Giornate AICAP’93, Pisa.
  • Aprile A., Benedetti A., Ceccoli C., (1991), “Strutture Sismicamente Isolate: Analisi Dinamica nel Dominio delle Frequenze di Oscillatori Non Lineari”, Atti del 5° Convegno Nazionale ANIDIS, Palermo.

Pubblicazioni sezione materiali

Riviste internazionali

  • Rizzoni, R., Dumont, S., Lebon, F., Sacco, E. Higher order adhesive effects in composite beams, European Journal of Mechanics, A/Solids, 85, n. 104108, 2021.
  • Gulinelli, P., Aprile, A., Rizzoni, R., Grunevald, Y.-H., Lebon, F. Multiscale numerical analysis of TRM-reinforced masonry under diagonal compression tests, Buildings, 10 (11), n. 196, 1-20, 2020.
  • Rizzoni, R., Livieri, P., Tovo, R., Cova, M. Development of a hierarchical model for voids clusters suitable for cast iron degenerated graphite, Theoretical and Applied Fracture Mechanics, 109, n. 102731, 2020.
  • Dumont, S., Serpilli, M., Rizzoni, R., Lebon, F., Numerical Validation of Multiphysic Imperfect Interfaces Models, Frontiers in Materials, 7, n. 158, 2020.
  • Serpilli M., Rizzoni R., Lebon F., Dumont S., An asymptotic derivation of a general imperfect interface law for linear multiphysics composites, International Journal of Solids and Structures 180-181, 97-107, 2019.
  • Dumont S., Rizzoni R., Lebon F., Sacco E., Soft and hard interface models for bonded elements, Composites Part B: Engineering 153, 480-490, 2018.
  • Fortini A., Rizzoni R., Suman A., Fabbri E., Merlin M., Pinelli M., An experimentally-driven approach to model bending in a thermally activated SMA-based beam, Smart Materials and Structures 27 (12), 125004, 2018.
  • Raffa M.L., Lebon F., Rizzoni R., Derivation of a model of imperfect interface with finite strains and damage by asymptotic techniques: an application to masonry structures, Meccanica 53(7), 1645-1660, 2018.
  • Dumont S., Lebon F., Rizzoni R., Imperfect interfaces with graded materials and unilateral conditions: theoretical and numerical study, Mathematics and Mechanics of Solids 23 (3), 445-460, 2018.
  • Guinovart-Sanjuán D., Rizzoni R., Rodríguez-Ramos R., Guinovart-Díaz R., Bravo-Castillero J., Alfonso-Rodríguez R., Lebon F., Dumont S., Sabina F.J., Assessment of models and methods for pressurized spherical composites, Mathematics and Mechanics of Solids, 23 (2), 136-147, 2018.
  • Lebon F., Rizzoni R., Higher order interfacial effects for elastic waves in one dimensional phononic crystals via the Lagrange-Hamilton’s principle, European Journal of Mechanics, A/Solids, 67, 58-70, 2018.
  • Dumont S., Lebon F., Raffa M.L., Rizzoni R., Towards nonlinear imperfect interface models including micro-cracks and smooth roughness, Annals of Solid and Structural Mechanics, 9 (1-2), 13-27, 2017.
  • Guinovart-Sanjuán D., Rizzoni R., Rodríguez-Ramos R., Guinovart-Díaz R., Bravo-Castillero J., Alfonso-Rodríguez R., Lebon F., Dumont S., Sevostianov I., Sabina F.J, Behavior of laminated shell composite with imperfect contact between the layers, Composite Structures, 176, 539-546, 2017.
  • Bonetti E., Bonfanti G., Lebon F., Rizzoni R, A model of imperfect interface with damage, Meccanica, 52 (8), 1911-1922, 2017.
  • Rizzoni R., Dumont S., Lebon F., On Saint Venant-Kirchhoff imperfect interfaces, International Journal of Non-Linear Mechanics, 89, 101-115, 2017.
  • Raffa M.L., Lebon F., Rizzoni R., On modelling brick/mortar interface via a St. Venant-Kirchhoff orthotropic soft interface. Part II: in silico analysis, International Journal of Masonry Research and Innovation 2 (4), 259-273, 2017.
  • Raffa M.L., Lebon F., Rizzoni R., On modelling brick/mortar interface via a St. Venant-Kirchhoff orthotropic soft interface. Part I: theory, International Journal of Masonry Research and Innovation 1 (2), 142-164, 2017.
  • F. Lebon, S. Dumont, R. Rizzoni, J.C López-Realpozo, R. Guinovart-Díaz, R. Rodríguez-Ramos, J. Bravo-Castillero, F.J. Sabina, Soft and hard anisotropic interface in composite materials, Composites Part B: Engineering, 90, 58-68, 2016.
  • M. Merlin, M. Scoponi, C. Soffritti, A. Fortini, R. Rizzoni, G.L. Garagnani, On the improved adhesion of NiTi wires embedded in polyester and vinylester resins, Frattura ed Integrità Strutturale, 31, 127-137, 2015.
  • A. Chiozzi, M. Merlin, R. Rizzoni, A. Tralli, Comparative assessment of two constitutive models for superelastic shape-memory wires against experimental measurements, Mechanics of Advanced Materials and Structures, 22 (9), 731-747, 2015.
  • R. Rizzoni, S. Marfia, A thermodynamical formulation for the constitutive modeling of a shape memory alloy with two martensite phases, Meccanica, 50 (4), 1121-1145, 2015.
  • A. Fortini, M. Merlin, R. Rizzoni, S. Marfia, TWSME of a NiTi strip in free bending conditions: Experimental and theoretical approach, Frattura ed Integrità Strutturale, 8 (29), 74-84, 2014.
  • R. Rizzoni, S. Dumont, F. Lebon and E. Sacco, Higher order models for soft and hard interface, International Journal of Solids and Structures 51, 4137-4148, 2014.
  • A. Fortini, M. Merlin, R. Rizzoni, S. Marfia, TWSME of a NiTi strip in free bending conditions: experimental and theoretical approach, Frattura e Integrità Strutturale, 29, 74-84, 2014.
  • S. Dumont, F. Lebon and R. Rizzoni, An asymptotic approach to the adhesion of thin stiff films, Mechanics Research Communications, 58, 24-35, 2014.
  • Lebon, F., Rizzoni, R. Modeling a hard, thin curvilinear interface, Discrete and Continuous Dynamical Systems – Series S, 6 (6), 1569-1586, 2013.
  • Rizzoni, R., Lebon, F. Imperfect interfaces as asymptotic models of thin curved elastic adhesive interphases, Mechanics Research Communications, 51. 39-50, 2013
  • Marfia, S., Rizzoni, R. One-dimensional constitutive SMA model with two martensite variants: Analytical and numerical solutions, European Journal of Mechanics, A/Solids, 40, 166-185, 2013.
  • Rizzoni, R., Merlin, M., Casari, D. Shape recovery behaviour of NiTi strips in bending: Experiments and modelling, Continuum Mechanics and Thermodynamics, 25 (2-4), 207-227, 2013.
  • M. Merlin, R. Rizzoni, V. Mazzanti, Martensitic thin wires under restrained recovery: theoretical and experimental aspects, Tecknische Mechanik, 32, 2-5, 535-545, 2012.
  • F. Lebon, R. Rizzoni, Asymptotic analysis of an elastic thin interphase with mismatch strain, European Journal of Mechanics A 36, 1-8, 2012.
  • F. Lebon, R. Rizzoni, Asymptotic analysis of an adhesive joint: a focus on cylindrical coordinates, Machine Dynamics Research 35, 97-107, 2011.
  • F. Lebon, R. Rizzoni, Asymptotic behavior of a hard thin interphase in linear elasticity: an energy approach, International Journal of Solids and Structures, 48, 441-449, 2011.
  • R.Rizzoni, A constrained theory for single crystal shape memory wires with application to restrained recovery, Continuum Mechanics and Thermodynamics, Vol. 23, N. 4, 319-335, 2011.
  • F. Lebon, R. Rizzoni, Asymptotic analysis of a thin interface: the case involving similar rigidity, International Journal of Engineering Science, Volume 48, Issue 5, 473-486, 2010.
  • G. Del Piero, R. Rizzoni, Weak local energy minimizers in finite elasticity, Journal of Elasticity, vol. 93 (3), 2008.
  • F. Lebon, R. Rizzoni, Asymptotic study of a soft thin layer: the non-convex case, Mechanics of Advanced Materials and Structures, vol. 15, n.1, 2008.
  • F. Lebon, R. Rizzoni, S. Ronel-Idrissi, Analysis of some non-linear soft thin layers, Computers and Structures82, 1929-1938, 2004.
  • F. Davì e R.Rizzoni, On twinning and domain switching in ferroelectric Pb(Zr1-x Tx )O3. Part I: twins and domain walls, J. Mech. Phys. Solids, 52 (1), 113-144, 2004.
  • R.D. James e R. Rizzoni, Piecewise Rigid Body Mechanics, J. Nonlinear Sci. 13:65-114, 2003.
  • R.D. James e R. Rizzoni, Pressurized shape memory thin films Journal of Elasticity, vol. 59(1-3), 399-436, 2000.

Contributi in volumi

  • Dumont S., Lebon F., Rizzoni R., Serpilli M., Derivation of Imperfect Interface Laws for Multi-Physic Composites by a Multiscale Approach: Theoretical and Numerical Studies, 2020. In Developments and Novel Approaches in Biomechanics and Metamaterials. Editori Abali B.E., Giorgio I. Advanced Structured Materials 132, 2020, 323-340.
  • Dumont S., Lebon F., Raffa M.L., Rizzoni R., Welemane H., Multiscale modeling of imperfect interfaces and applications, 2016. In: Ibrahimbegovic A. (eds) Computational Methods for Solids and Fluids. Computational Methods in Applied Sciences, vol 41, 81-122.
  • F. Lebon, Frédéric, R. Rizzoni, S. Ronel-Idrissi, Numerical Analysis of Two Non-linear Soft Thin Layers, in “Mechanics, Models and Methods in Civil Engineering”, Lecture Notes in Applied and Computational Mechanics vol. 61, M. Frémond and F. Maceri editors, Springer Berlin / Heidelberg, Isbn: 978-3-642-24637-1, 299-308, 2012.
  • F. Lebon, R. Rizzoni, Modelling adhesion by asymptotic techniques, in “Adhesive Properties in Nanomaterials, Composites and Films”, Editors: Keri A. Wilkinson and Daniel A. Ordonez, Nova Publisher, 2011.
  • G. Del Piero, R. Rizzoni, Two-sided estimates for local minimizers in compressible elasticity, Integral Methods in Science and Engineering, a cura di C. Constanda e S. Potapenko, Birkhäuser Boston, 2007.

Comunicazioni a congressi internazionali

  • Gulinelli P., Aprile A., Rizzoni R., Grunevald Y.H., Lebon F., Lovisetto R., Tralli S. A FE model for TRM reinforced masonry walls with interface effects. MuRiCo6 Bologna 2019. Mechanics of Masonry Structures Strengthened with Composite: Materials Modeling, Testing, Design, Monitoring, Control, Bologna, 26-28 giugno 2019. Key Engineering Materials, 817, 57-64.
  • Cova M., Livieri P., Rizzoni R., Tovo R., A preliminary investigation of strength models for degenerate graphite clusters in grey cast iron. Third International Symposium on Fatigue Design and Material Defects, Lecco, 19-22 settembre 2017. Procedia Structural Integrity 7, 446-452, 2017.
  • F. Lebon, M.L. Raffa, R. Rizzoni, A nonlinear interface model applied to masonry structures, (2015) AIP Conference Proceedings, 1702, art. no. 160004.
  • R. Rizzoni, S. Dumont, F. Lebon, Asymptotic analysis of nonlinear elastic adhesives, Proceedings of SPB 2015 International Conference on Shells, Plates and Beams, Bologna, 9-11/9/2015, in Structural and Computational Mechanics Book Series, ISSN: 2421-2822, ISBN 978-88-7488-886-3.
  • S. Dumont, F. Lebon, R. Rizzoni, E. Sacco, On Models for interfaces: theory and computational results, 11th World Congress on Computational Mechanics (WCCM XI), July 20–25, 2014, Barcelona, Spain
  • S. Dumont, F. Lebon and R. Rizzoni, An asymptotic approach to the adhesion of thin stiff films , Proceeding of Euromech Colloquium 548 – Direct and variational methods for nonsmooth problems in mechanics, Amboise, France, 2013. – M. Merlin, A. Fortini, R. Rizzoni and S. Marfia, Flexural recovery behavior of a NiTi strip in partially constrained conditions, Proceedings of the 6th ECCOMAS Conference on Smart Structures and Materials (SMART2013), Torino, 2013.
  • Chiozzi, A., Merlin, M., Rizzoni, R., Tralli, A., Experimental comparison for two one-dimensional constitutive models for shape memory alloy wires used in anti-seismic applications (2012) ECCOMAS 2012 – European Congress on Computational Methods in Applied Sciences and Engineering, e-Book Full Papers, pp. 4672-4682
  • A. Di Carlo, R. Paroni, R. Rizzoni, Modeling of thin coated plates with mismatch deformation, XXIII ICTAM, 19–24 August 2012, Beijing, China.
  • F. Lebon, R. Rizzoni , An Asymptotic Approach to Thin Film Adhesion, Proceedings of the Eleventh International Conference on Computational Structures Technology, B.H.V. Topping, (Editor), Civil-Comp Press, Stirlingshire, Scotland, 2012.
  • [c.20] F. Lebon, R. Rizzoni, Asymptotic analysis of curved elastic interfaces, Colloque Euromech, 514 New Trends in Contact Mechanics, Cargese, France, 27-31 March 2012.
  • M. Indirli, P. Corvaglia, R. Angiuli, L. Lanza, M. Merlin, R. Rizzoni, A. Chiozzi, A. Tralli, S. Briccoli Bati, M. Fagone, Fibre Reinforced Polymers (FRP) strips in series with Shape Memory Alloy (SMA) wires: theory, application and experimental results of a prototypal anti-seismic device in the framework of the MAMAS project, 15th World Conference on Earthquake Engineering, Lisboa, Portugal, 24-28 September 2012.
  • F. Lebon, R. Rizzoni, Asymptotic techniques for the modeling of thin layers, 19th French-Polish Seminarium in Mechanics, Perpignan, France, 8-11 June 2011.
  • R. Rizzoni, M. Merlin, V. Mazzanti, Martensitic thin wires under restrained recovery: theoretical and experimental aspects, Second International Conference on Material Modelling, Paris, 1st August-2 September, 2011.
  • M. Merlin, R. Rizzoni, Thermoelastic transformation behavior of NiTi strips in bending: experiments and modelling, CMM 2011, Computer Methods in Mechanics, Warsaw, Poland, May 9-12, 2011.
  • F. Lebon, R. Rizzoni, Analyse asymptotique d’une interface mince: cas de rigidités comparables, 10ème Colloque Franco-Roumain de Mathématiques Appliquées, Poitiers, France, 26-31 August 2010.
  • F. Lebon, R. Rizzoni, Asymptotic analysis of an elastic thin interphase with mismatch strain, IV European Conference on Computational Mechanics, Paris, May 16-21 2010.
  • M. Merlin, R. Rizzoni, Design of a polymeric prototype with variable geometry controlled by shape-memory strips, Advances in Geomaterials and Structures, Djerba, Tunisia, 10-12 May 2010.
  • F. Lebon, R. Rizzoni, On the modelling of perfect/imperfect interfaces, 2nd Symposium on Mathematical Modeling, Mechanics and Materials, Udine, Italy, 11-14 January 2008.
  • M. Merlin, R. Rizzoni, Shape Control of Polymeric Sheets Using SMA Wires, Prager Medal Symposium in Honor of Richard James: Using Mechanics to Discover New Materials, Society of Engineering Science 45th Technical Meeting, October 12-15, 2008, University of Illinois at Urbana-Champaign, USA.
  • F. Lebon, R. Rizzoni, Asymptotic behavior of a thin inclusion in an elastic body. The case of comparable rigidity, 8th. World Congress on Computational Mechanics (WCCM8) and 5th. European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), June 30 – July 5, 2008, Venice, Italy
  • F. Lebon, R. Rizzoni, Perfect and imperfect interfaces, Colloquium Lagrangianum, Paris, France, 6-8 December 2007.
  • F. Lebon, R. Rizzoni, Asymptotic development for bonded composite elastic structures: Gamma-limit and analytical examples, International Conference on Advances in Mechanical Engineering and Mechanics (ICAMEM 2006), Tunisia, December 17-19 2006.
  • F. Lebon, R. Rizzoni, S. Ronel-Idrissi, Numerical analysis of linear and non linearsoft thin layers, The 3rd International Conference on Structural Stability and Dynamics, June 19-22, 2005, Kissimmee, Florida
  • F. Lebon, R. Rizzoni, Some Remarks on Asymptotic Studies of Interface: the Non Convex Case, ECCOMAS 2004.
  • Del Piero e R. Rizzoni, Local minima in incompressible elasticity, Meeting Principles, Methods and Taste in Continuum Physics and Mathematical Analysis in honor of M.E. Gurtin, Carnegie Mellon University, giugno 2004.
  • R. Rizzoni, On the motion of a shape memory cantilever subject to harmonic end displacement. PAMM, vol. 3/1; 24-27, 2003.
  • F. Lebon, R. Rizzoni, S. Ronel-Idrissi, C. Licht, Analysis of non linear soft thin interfaces, 6th Int. Conf. on Computational Structures Technology, Prague, settembre 2002 (CD-Rom).
  • R.D. James, R. Rizzoni, Pressure-temperature relations for NiTi and CuAlNi thin films, poster presentato alla quarta Conferenza Europea di Meccanica dei Solidi (ESMC4), Metz, Francia, giugno 2000. Il poster è stato vincitore del premio “Giovane Ricercatore” della Conferenza.
  • G. Del Piero, R. Rizzoni, On the torsion of an incompressible cylinder with non-convex energy, Symposium Advances in the Continuum Mechanics and Thermodynamics of Material Behavior, Blacksburg, giugno 1999.

Comunicazioni a congressi nazionali

  • Serpilli M., Rizzoni R., Lebon F., Dumont S., Interface laws for multi-physics composites. Atti XXIV Congresso AIMETA di Meccanica Teorica e Applicata, Roma, 15-19 settembre 2019. Lecture Notes in Mechanical Engineering 2020, 441-454, code 238859. Editors Carcaterra A.,Graziani G.,Paolone A.
  • Cova M., Livieri P., Rizzoni R., Tovo R., A simplified multiscale model of degenerate graphite clusters in grey cast iron. 48° Convegno Nazionale AIAS, Assisi, 4-7 settembre 2019. Procedia Structural Integrity 24, 625-635, 2019.
  • S. Marfia and R. Rizzoni, A three phase thermo-mechanical constitutive model for shape memory alloys, Proc. XXI Congr. Naz. AIMETA, CD ROM, Torino, 2013.
  • A. Di Carlo, R. Paroni, R. Rizzoni, On thin coated plates with residual stress for the implementation of a crystalline undulator, Proc. XX Congr. Naz. AIMETA, CD ROM, Bologna, 12-15 settembre 2011.
  • R. Rizzoni, M. Merlin, D. Casari, Bending properties of heat-treated NiTi strips for actuation of smart reinforced beams, Proc. XX Congr. Naz. AIMETA, CD ROM, Bologna, 12-15 settembre 2011.
  • M. Merlin, R.Rizzoni, Modelling the constrained recovery in shape memory wires, Proc. XIX Congr. Naz. AIMETA, CD ROM, Ancona, 15-17 settembre 2009.
  • F. Lebon & R. Rizzoni, Asymptotic behavior of a thin inclusion in an elastic body: the case of comparable rigidity , Proc. XVIII Congr. Naz. AIMETA, CD ROM, Brescia 2007.
  • R. Paroni, R. Rizzoni, V. Guidi, On thin coated plates with residual stress for the implementation of a crystalline undulator, VII Convegno SIMAI; Ragusa, 22-26 maggio 2006.
  • G. Del Piero & R. Rizzoni, Local energy minimizers in incompressible elasticity, Proc. XVII Congr. Naz. AIMETA, CD ROM, Firenze 2005.
  • E. Benvenuti, R. Rizzoni, A. Tralli, V. Guidi, C. Malagù, G. Martinelli, M. Stefancich, D. Vincenzi, Design of Si/Si3N4 thin structures for implementation of a crystalline micro-undulator, poster presentato al Convegno dell’ Associazione Italiana Sensori e Microsistemi, IX edizione Ferrara, febbraio 2004.
  • F. Lebon e R. Rizzoni, Asymptotic analysis of soft thin layers with non convex energy, Atti del XVI Congresso Nazionale AIMETA, Ferrara, settembre 2003.
  • E. Benvenuti, R. Rizzoni, A. Tralli, V. Guidi, C. Malagù, G. Martinelli, M. Stefancich, D. Vincenzi, Identification of internal residual stress parameters in silicon/silicon nitride bilayers for implementation of a crystalline micro-undulator, Atti del XVI Congresso Nazionale AIMETA, Ferrara, settembre 2003.
  • R.D. James e R. Rizzoni, Piecewise Rigid Body Mechanics, Atti del XV Congresso Nazionale AIMETA, Taormina, settembre 2001.

TESI DI DOTTORATO

TESI DI DOTTORATO IN COTUTELA INTERNAZIONALE

  • Force-Based Seismic Design of Dual System RC Structures – Matteo Zerbin– 27/04/2017. Doctor Europeus. Cotutela: UNIFE-EPFL. Ecole Polytechnique Fédérale de Lausanne, Losanne, Switzerland.
  • Shear strengthening of RC beams using the embedded through section technique – Matteo Breveglieri – 09/04/2015. Doctor Europeus. Cotutela: UNIFE – UMINHO. Universitade do Minho, Guimarães, Portugal.
  • Continuum damage model for nonlinear analysis of masonry structures – Luca Pela’ – 26/03/2009. Doctor Europeus. Cotutela: UNIFE – UPC, Universitat Politècnica de Catalunya BarcelonaTech, Spain.

TESI DI DOTTORATO

  • Valutazione della risposta sismica di edifici esistenti alti in c.a. a pareti sismo-resistenti. Un esempio: la sede della regione Emilia-Romagna – Andrea Bucchi – 27/03/2014

Pin It on Pinterest